Level T Rear Hydraulic Disc Brake 1800 mm

The SRAM Level T rear hydraulic disc brake is designed for mountain bikes used in cross-country and trail riding. Part number 00.5018.105.001 identifies the rear configuration with a right-hand lever, an 1800 mm hydraulic hose and a caliper, all specified in a Gloss Black finish. It is a lever-and-caliper brake assembly intended to work with a suitable rotor and any mounting hardware required by the bicycle.

The Level T lever features a compact body and a stamped aluminum blade. Reach can be adjusted with a tool so the lever position can be set to suit the rider's hand and preferred grip. Contact-point adjustment is not provided on this model. A split, two-bolt lever clamp supports handlebar installation, and compatibility with the SRAM MatchMaker system allows integration with compatible controls when the cockpit setup permits it.

At the wheel, the hydraulic caliper uses two pistons and steel-backed organic brake pads. The two-piston layout acts on the pads on either side of the rotor, while the dedicated hydraulic circuit is designed for DOT 4 or DOT 5.1 brake fluid in accordance with SRAM specifications. The rotor itself must be selected separately. During installation and maintenance, the specified fluid and the manufacturer's bleeding procedures should be followed; mineral oil is not a substitute for the listed DOT fluids.

This is specifically the rear Level T assembly: the right-hand lever, the 1800 mm hose and the caliper are the key components of the identified configuration. A brake rotor and mounting bracket are not included. Before fitting, check the bicycle's brake mount, the compatible rotor size and the required hose routing. The manufacturer part number is 00.5018.105.001 and the barcode is 710845783777, making it possible to distinguish the exact variant from other Level models. It is a practical option for MTB riders looking for a rear hydraulic disc brake with a tool-adjustable lever and a two-piston caliper.