- -50%
- New
The SRAM PressFit 30 to BSA 83 mm adapter allows an external-cup BSA threaded bottom bracket to be fitted to a frame with an 83 mm PressFit 30 bottom bracket shell. It connects two different mounting standards while retaining the frame's PF30 interface. This 83 mm version is identified by SRAM part number 00.6415.049.020 and is distinct from the adapter designed for 68/73 mm shells. Made for setups requiring an English-threaded bottom bracket, it provides a dedicated interface between the frame and a compatible BSA bottom bracket.
The SRAM PressFit 30 to BSA 83 mm adapter is designed for frames with an 83 mm-wide PressFit 30 bottom bracket shell. Its purpose is to allow a BSA English-threaded bottom bracket with external cups to be installed in a frame originally intended for a PressFit 30 arrangement. By linking two different mounting interfaces, this component makes a threaded bottom bracket an option for a suitable PF30 frame and drivetrain setup.
PressFit 30 and BSA describe different ways of connecting the bottom bracket to the frame. In a PF30 arrangement, the bottom bracket shell is designed for a press-fit interface. A BSA bottom bracket, on the other hand, uses English threads and a compatible set of cups. This SRAM adapter bridges the two approaches: it fits the PF30 shell and offers the threaded interface needed by a suitable BSA external-cup bottom bracket. The original frame shell remains PressFit 30, while the selected bottom bracket can match the intended crankset.
Shell width is essential when choosing the correct adapter. This version is intended specifically for an 83 mm PF30 shell; it is not the same article as the SRAM version for 68 or 73 mm shells. Although both versions have the same general purpose, their different sizes correspond to different frame dimensions. The frame must therefore use an 83 mm PressFit 30 shell, and the bottom bracket selected for installation must be a suitable BSA model with external cups. Crankset compatibility is determined by that bottom bracket and the drivetrain configuration, rather than by the adapter alone.
SRAM identifies the 83 mm adapter with part number 00.6415.049.020 and EAN 710845661822. These identifiers distinguish it from other bottom bracket adapters, including the 68/73 mm alternative and complete bottom bracket assemblies. It is a practical component for builds and replacement work where a threaded BSA bottom bracket is required on an 83 mm PF30 frame, while keeping the frame's original bottom bracket shell standard.