G SES 6.7 Pro DB

ENVE G SES 6.7 Pro DB carbon wheels are engineered for gravel racing when sustained speed makes aerodynamics a key consideration. The G SES family applies ENVE's airflow-focused approach to the wide, high-volume tires used on modern gravel bikes. This wheelset is aimed at fast courses, exposed sections and long stretches where maintaining momentum can be as important as acceleration.

The wheelset uses different rim depths front and rear: 60 mm at the front and 67 mm at the back. Both rims feature a substantial 35 mm internal width, developed around wide gravel tires and the need to manage airflow where tire and rim meet. ENVE recommends tire widths of 44–52 mm and specifies a 44 mm minimum. Before fitting tires, riders should check that the chosen models are approved for the hookless rim design.

ENVE Wide Hookless Bead technology uses a broad, 3.8 mm rim edge designed to disperse impact energy and help reduce pinch flats on rough terrain. ENVE specifies a maximum pressure of 50 psi, or 3.4 bar, for these rims. Tire manufacturer limits must also be observed, particularly when they are lower. ENVE manufactures the G SES rims in Ogden, Utah, bringing its design, testing and production activities together.

INNERDRIVE PRO hubs combine a lightweight hub shell with a 40-tooth PRO ratchet, a low-drag spring and ENVE PRO Ceramic bearings. The claimed hubset weight is 281 g. Each wheel uses 24 Silver Alpina Ultralite spokes and a Centerlock disc interface; disc lockrings are not included. Thru-axle spacing is 12x100 mm at the front and 12x142 mm at the rear, in the 700c wheel format.

The claimed wheelset weight is 1580 g with an HG freehub, tubeless tape and valves included. ENVE lists the front wheel at 735 g and the rear at 845 g. With deep carbon profiles, a 35 mm internal channel and performance-focused hub technology, the G SES 6.7 Pro DB is designed for riders targeting high-speed gravel races and demanding mixed-surface rides.